
Boneless Strip Steak: Lean Cut Guide & Calculator
Also Known As: New York Strip; Top Loin Steak; Strip Loin; Kansas City Strip; Delmonico; Club Steak; IMPS 1180; Longissimus lumborum
A classic American steakhouse cut from the Longissimus lumborum muscle of the Short Loin primal. When trimmed to 0" exterior fat, it qualifies as USDA Lean beef and provides reference values for nutrition logging and meal planning.
Informational use only: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (NDB 13058 raw / NDB 13060 cooked grilled) unless noted.
Where This Cut Comes From:
Short Loin Primal | Top Loin Subprimal (IMPS 180)
Carved from the Longissimus lumborum muscle running along the upper spine in the lumbar region. Because this muscle supports the vertebral column without participating in athletic locomotion, it maintains natural tenderness (WBSF shear 3.1–3.4 kg) while developing intense beef flavor.
Don't slice off the perimeter fat cap before cooking! Render it with tongs against the skillet for 60 seconds to create cooking tallow that lubricates the pan and flavors the steak. Trim the rendered fat on your plate after cooking if you want a lower-fat logged portion.
Strip Steak Searing & Reverse-Sear Calculator
For thick-cut steaks (1.25"–2.0"). The algorithm calculates gentle 225°F oven warm-up time, core pull point, flash sear time, and carryover coasting for edge-to-edge pink doneness.
Official FDA Nutrition Facts Panel
Nutrition Facts
Serving size: 8 oz (227g) Raw Standard Center-Cut Steak
* The % Daily Value (DV) tells you how much a nutrient in a serving of food contributes to a daily diet. 2,000 calories a day is used for general nutrition advice. Source: USDA FoodData Central NDB 13058 (raw Choice, 0" trim) & NDB 13060 (cooked grilled).
Culinary Preparation Protocols
Five validated chef blueprints tailored specifically for boneless strip steaks: from precision low-oven reverse searing with garlic-herb arrosé to two-zone charcoal grilling and apartment cold-pan searing.
Precision Reverse-Sear with Garlic-Herb Arrosé
The definitive chef protocol for thick-cut boneless strip steak (1.5" or thicker). By warming the meat gently in a low-temperature oven (225°F) before searing in a smoking cast-iron skillet, you achieve edge-to-edge medium-rare doneness with zero gray band, finished with foaming butter, smashed garlic, and fresh thyme basting (arrosé).
Best For: 1.25" to 2.0" thick boneless NY strip steaks, date-night centerpieces, gourmet dinner parties.
Step-by-Step Protocol:
Heavily season all sides of the boneless strip steak with coarse kosher sea salt (approx 1.2% by steak weight). Place uncovered on an elevated wire rack in the refrigerator for 12 to 24 hours to desiccate the exterior surface for explosive crust formation.
Preheat oven to 225°F (107°C). Place steak on wire baking sheet and bake until a digital core probe reads exactly 118°F–120°F for medium-rare (approx 25–35 minutes).
Heat a heavy 12-inch cast-iron skillet over high heat until it reaches 450°F–500°F. Add 1 tablespoon high-smoke-point beef tallow or avocado oil.
Using tongs, hold the steak vertically on its perimeter fat rim for 45–60 seconds to render and crisp the edge tallow. Lay flat and sear undisturbed for 45 seconds per side to trigger intense Maillard caramelization.
Reduce heat to medium. Drop in 2 tablespoons unsalted European butter, 2 lightly crushed garlic cloves, and fresh thyme sprigs. Tilt the pan and continuously spoon foaming herb butter over the steak for 45 seconds.
Transfer to a warm wooden board and rest for 8 minutes. Slicing across the grain into 1/2-inch strips ensures tender, juicy perfection.
Informational Use Only: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (NDB 13058 raw / NDB 13060 cooked grilled) unless noted.
Nutritional Architecture of Boneless Strip Steak
The boneless strip steak (Longissimus lumborum) is a common steakhouse cut with lean USDA reference values when exterior fat is trimmed to 0". Calibrated against USDA SR records (NDB 13058 raw Choice and NDB 13060 cooked grilled), here is how the cut compares across three reference categories for nutrition logging.
Protein Reference per 100g
USDA reference data lists 22.8g protein per 100g raw (NDB 13058) and about 29g per 100g cooked grilled (NDB 13060). Roughly 64% of raw calories come from protein with 5.6g total fat per 100g—helpful when comparing lean steak cuts in a food diary.
USDA Certified Lean Beef
Officially satisfies USDA Title 9 CFR § 317.362: raw separable lean trimmed to 0" fat contains only 5.6g total fat (under the 10.0g federal ceiling), 2.1g saturated fat (under the 4.5g ceiling), and 62mg cholesterol (under the 95mg ceiling) per 100g serving.
Iron, Zinc & B12 per 100g Raw
Per 100g raw USDA baseline: 1.8mg iron (10% DV), 3.9mg zinc (35% DV), 2.1µg vitamin B12 (88% DV), and 23.5µg selenium (43% DV). Values are for food diary reference only—not guidance on intake targets.
Biomechanics of Longissimus Lumborum & Maillard Kinetics
Why does a boneless strip steak deliver the quintessential steakhouse chew? Explore the anatomical fiber structure of the lumbar spine and the thermal laws governing surface crust formation versus interior moisture retention.
High tenderness rating (Belew et al., 2003). Slightly firmer than tenderloin (2.8 kg) but noticeably more tender than top sirloin (3.6 kg) or flank (3.9 kg).
Suspension muscle running longitudinally along the lumbar spine. Receives minimal physical strain, leading to fine muscle fascicles and low connective collagen.
At surface heat above 300°F, reducing sugars and amino acids cross-link rapidly to produce hundreds of aromatic heterocyclic flavor compounds (Maillard crust).
The Physics of Dry-Brining & Surface Desiccation
Water is the mortal enemy of a deep sear. Liquid water cannot exceed 212°F (100°C) before turning to steam, which absorbs 2,260 joules per gram of energy. When a damp steak hits a hot pan, energy is wasted evaporating steam rather than creating a crust.
By dry-brining the steak uncovered on a wire rack for 12 to 24 hours, cold circulating refrigerator air removes surface moisture. When the desiccated steak touches 450°F cast iron, the Maillard reaction begins instantaneously, developing a crackling brown crust in just 45 seconds.
Why the Reverse-Sear Prevents the Overcooked Gray Band
Direct high-heat cooking creates an extreme thermal gradient: the exterior hits 350°F while the core is still 50°F, resulting in a thick gray band of well-done, dried meat surrounding a small pink center.
Reverse-searing warms the entire steak gradually in a 225°F oven until the core reaches 120°F. Because the core is already warm and the surface is bone-dry, a flash 45-second sear browns the exterior before heat can conduct inward, yielding 95% wall-to-wall rosy medium-rare doneness.
Short Loin Vertebral Axis & Thermal Crust Dynamics
Dual-panel scientific diagram illustrating the anatomical fabrication of boneless strip steak from the lumbar vertebrae (Panel A) and the cross-sectional thermal gradient comparison between reverse searing and direct searing (Panel B).
Cross-section of the lumbar vertebra showing the Strip Steak (Longissimus lumborum) separated from the Tenderloin (Psoas major) by the transverse process bone. De-boning this side yields the boneless strip steak (IMPS 1180).
Cross-section comparison demonstrating how low-temperature oven warming followed by a flash sear eliminates the gray band of overcooked meat compared to traditional direct high-heat searing.
Boneless Strip Steak vs. Other Iconic Steaks
Side-by-side comparison of Boneless Strip Steak against Filet Mignon, Ribeye, Top Sirloin, Flat Iron, and T-Bone across fat content, protein density, shear force tenderness, and culinary applications.
| Cut Name | Primal | Anatomical Muscle | Fat (%) | Protein / 100g | Calories | WBSF Shear Force | Best Cooking Method |
|---|---|---|---|---|---|---|---|
| ★ Strip Steak (Boneless Lean) | Short Loin | Longissimus lumborum | 5.6% | 22.8g | 142 kcal | 3.1 – 3.4 kg | Cast-iron reverse-sear or 2-zone charcoal grill |
| Filet Mignon (Tenderloin) | Loin | Psoas major | 7.1% | 22.2g | 158 kcal | 2.6 – 3.1 kg | Pan-sear with butter arrosé basting |
| Ribeye Steak (Boneless) | Rib | Longissimus thoracis / Spinalis dorsi | 15.4% | 20.3g | 228 kcal | 2.9 – 3.3 kg | High-heat direct sear to render marbling |
| Top Sirloin Steak (Center-Cut) | Sirloin | Gluteus medius | 5.6% | 21.8g | 146 kcal | 3.3 – 3.8 kg | Cast-iron skillet sear or direct grilling |
| Flat Iron Steak | Chuck | Infraspinatus | 6.8% | 20.9g | 151 kcal | 2.9 – 3.3 kg | High-heat flash sear to medium-rare |
| T-Bone Steak (Bone-In) | Short Loin | Longissimus + Psoas major | 12.8% | 21.2g | 210 kcal | 3.0 – 3.4 kg | Two-zone grilling with strip facing fire |
Macro values are per 100g raw, separable lean only, trimmed to 0" fat, Choice grade (USDA SR reference records). Warner-Bratzler shear ranges from Belew et al. (2003). Price tiers are general retail planning estimates.
Global Nomenclature & Cultural Traditions
Because of its prominence in restaurant culture, the strip steak has acquired iconic regional names worldwide—from Delmonico’s 19th-century Manhattan fame to the Argentine *bife de chorizo*.
Fabricated under IMPS 180 (whole subprimal) and IMPS 1180 / 1180A (boneless steaks). The iconic American steakhouse cut made famous by Delmonico’s Restaurant in 19th-century New York.
In the UK, this cut is universally called "Sirloin Steak" (while what Americans call sirloin is called "Rump"). In Australia, boneless strip steaks are frequently sold as "Porterhouse".
Revered in French bistro dining as the premier cut for classic *steak frites* with sauce béarnaise or rich red wine shallot reduction.
The crown jewel of the Argentine *asado*. Cut into massive 1.5 to 2-inch thick slabs and slow-grilled over quebracho hardwood coals with chimichurri.
A staple of German gasthof dining, pan-seared and crowned with crisp fried onions (*Zwiebelrostbraten*) and rich dark beef jus.
IMPS 180 / 1180 Fabrication & 0" Trim Standard
Professional butcher specifications for fabricating whole boneless strip loins (IMPS 180) into portion-controlled center-cut steaks (IMPS 1180) with clean perimeter trimming.
Place the strip loin fat-side up. Using a 10-inch curved breaking knife, bevel the exterior fat cap down to an even 1/8-inch thickness, or trim completely to 0 inches for fully lean portions. This eliminates excessive skillet flare-ups.
Locate the 1-inch to 2-inch flank-edge "lip" (serratus dorsalis caudalis). To create a premium center-cut steakhouse strip (IMPS 1180A), slice along the natural seam to remove the lip completely, leaving only the pristine *Longissimus lumborum* eye.
Slice steaks perpendicular to the longitudinal grain at exact 1.5-inch intervals using a long slicing knife in single, smooth strokes. Portion steaks to 12 oz or 16 oz weights. Scoring the thin fat edge at 1-inch intervals prevents steak curling during cooking.
Boneless Strip Steak Questions & Answers
Detailed culinary, nutritional, and meat science answers to help you select, season, reverse-sear, and rest boneless strip steak with master steakhouse precision.
Official References & Scientific Literature
- U.S. Department of Agriculture, Agricultural Research Service (2019). FoodData Central: Beef, loin, top loin steak, boneless, lip-off, separable lean only, trimmed to 0" fat, choice, raw (NDB: 13058). USDA FoodData Central Analytical Database.
- U.S. Department of Agriculture, Agricultural Research Service (2019). FoodData Central: Beef, loin, top loin steak, boneless, lip-off, separable lean only, trimmed to 0" fat, choice, cooked, grilled (NDB: 13060). USDA FoodData Central Analytical Database.
- Belew, J. B., Brooks, J. C., McKenna, D. R., & Savell, J. W. (2003). Warner-Bratzler shear evaluations of 40 bovine muscles: Longissimus lumborum tenderness profiling. Meat Science, 64(4), 507-512. doi:10.1016/S0309-1740(02)00242-5.
- North American Meat Institute (NAMI) (2014). The Meat Buyers Guide: Beef Loin, Top Loin Steak, Boneless IMPS 180 / 1180 / 1180A. Reston, VA: North American Meat Institute.
- Title 9, Code of Federal Regulations (2023). 9 CFR § 317.362 - Labeling of meat and poultry products with nutritional claims: "Lean" Standard. U.S. Government Publishing Office (GPO).
Related tools
Beef Nutrition by Cut
Open the guide hub for shared raw-reference cut charts, comparison links, and system-level methodology.
T-Bone Steak Nutrition & Searing Calculator
Explore T-Bone steak nutrition (IMPS 1174), dual-muscle Short Loin anatomy, 22% bone tare calculator, and 2-zone searing blueprints.
Tenderloin Steak & Filet Mignon Nutrition
Explore boneless lean tenderloin steak nutrition (IMPS 190A), USDA lean certification, and dynamic searing calculator.
Top Sirloin Steak Nutrition
Explore boneless lean top sirloin steak nutrition (IMPS 184B), USDA lean certification, and dynamic searing calculator.
Sirloin Tip Roast Nutrition & Convection Guide
Explore boneless extra-lean sirloin tip roast nutrition (IMPS 167/167A), USDA extra-lean certification, and dynamic 250°F convection roasting calculator.
Steak Temperature Chart & Doneness Table
Interactive doneness chart with 6 levels, pull temperatures by thickness, 8 cooking methods, carryover guide, and thermometer placement tips.
Best Beef Cuts for Grilling
Compare 13 steak cuts by tenderness, marbling, flavor, budget, and difficulty with interactive filters and grilling tips.