
Flat Iron Steak: Cut Guide & Nutrition Calculator
Also Known As: Top Blade Steak; Butler's Steak; Feather Blade; Paleron; Misuji; IMPS 114D
The second-most tender muscle in the beef carcass (Infraspinatus), carved from the Chuck Shoulder Clod. Rich intramuscular marbling suited to steakhouse skillet searing. USDA reference: 185 kcal, 19.8g protein, 11.2g fat, and 6.2mg zinc per 100g raw—for food-diary logging and searing plans.
Chuck Primal | Top Blade Subprimal
The Infraspinatus muscle is nestled directly beneath the shoulder blade (scapula) spine. Because it acts primarily as a joint stabilizer rather than a heavy locomotive driver, its muscle fibers remain remarkably tender and fine-grained.
Butcher's Pro Note: Seaming the Grisl
The Top Blade historically suffered from a tough connective tissue tendon running down its middle. Flat Iron steaks are produced by laying the muscle flat and cutting horizontally directly along the central tendon sheet.
This yields two flat, gristle-free steaks with delicate fiber structure and Warner-Bratzler shear force ratings rivaling tenderloin at a fraction of the cost.
Flat Iron Steakhouse Sear & Grill Calculator
Select steak weight, cooking method, and desired doneness. The algorithm calculates precise searing times, digital core pull targets, resting parameters, and 90° carving guidance.
💡 Pro-Tip: Always blot flat iron steak bone-dry before searing. Moisture on the meat creates steam and delays the Maillard reaction.
USDA Nutrition Facts Panel
Informational use only: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (FDC 170364, raw Choice separable lean trimmed to 0" fat) unless noted.
Values are per listed serving size (USDA FoodData Central). % DV uses the FDA 2,000 kcal reference diet for label-style logging only. USDA "Lean" tier follows Title 9 CFR § 317.362 labeling thresholds—not health recommendations. Source: USDA FoodData Central FDC ID 170364 (NDB 13955).
Nutrition Facts
Informational Use Only: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (FDC 170364, raw Choice separable lean trimmed to 0" fat) unless noted.
USDA Macro Logging Reference: Flat Iron Steak
Flat Iron Steak (Infraspinatus from the Chuck Clod subprimal) delivers uniform marbling with the tenderness of a luxury loin cut. Calibrated against USDA FoodData Central (FDC ID 170364 raw Choice separable lean, 170365 cooked grilled), here are the three core logging pillars.
19.8g Protein & 11.2g Fat
USDA data lists 19.8g protein with 11.2g intramuscular fat per 100g raw. Delivers sustained culinary satisfaction with rich marbling.
2.4–2.8 kg WBSF Rating
Meat science evaluations (Belew et al., 2003) rank the Infraspinatus as the second-most tender muscle in the steer, trailing only tenderloin:
Zinc, B12 & Iron per 100g Raw
USDA raw baseline (FDA 2,000 kcal DV reference for label-style logging only—not intake recommendations):
Why Direct High-Heat Searing & Cast-Iron Arrosé Protects the Infraspinatus
Because the central gristle tendon has been removed during fabrication, the resulting Flat Iron steak consists purely of fine-grained, delicate muscle fibers. Unlike shoulder cuts that require hours of braising, flat iron excels under direct high-heat searing.
Ultra Tender scientific classification (Belew et al., 2003). Far more tender than strip loin (3.2 kg) or top sirloin (3.6 kg).
Fine web-like dendritic marbling distributed evenly across the muscle, providing rich mouthfeel without thick exterior fat bands.
Pulling at 130°F allows carryover heat to settle at 135°F medium-rare, locking in intracellular juices before actin filaments contract.
Myosin denatures; cellular moisture fully locked (>92%). Soft muscle texture.
Intramuscular marbling melts, lubricating fibers. Lowest chew resistance (2.6 kg WBSF).
Actin contracts longitudinally. Moisture expulsion increases from 12% to 24%.
Myofibrils compress tightly. Squeezes out juices, leading to gray, dry mouthfeel.
The University Meat Science Discovery
Prior to the year 2000, the beef chuck was viewed as a lower-value primal suitable only for grinding and pot roasts. In a research project funded by the beef checkoff, Dr. Chris Calkins (University of Nebraska) and Dr. Dwain Johnson (University of Florida) mapped the tenderness of 39 distinct chuck muscles.
They isolated the Infraspinatus and developed the horizontal seaming method that removed the center tendon, giving birth to the Flat Iron Steak—transforming a \$3/lb roast cut into a high-value steakhouse staple.
The 90-Degree Bias Carving Mandate
The Infraspinatus muscle fibers run diagonally along the rectangular steak. Chewing parallel to these fibers forces teeth to grind through intact muscle bundles.
Carving thin 4mm to 5mm slices on a slight bias at a strict 90-degree angle across the grain shortens fiber length, resulting in a velvety, melt-in-the-mouth chew that rivals filet mignon.
Top Blade Seaming Architecture & Carcass Tenderness Spectrum
Dual-panel scientific diagram illustrating how the Top Blade is split horizontally along its central connective tendon to produce two Flat Iron steaks (Panel A) and the comparative Warner-Bratzler Shear Force tenderness spectrum across iconic beef cuts (Panel B).
The boneless Top Blade is divided into upper and lower muscle halves by a tough white fascia tendon. Horizontal knife seaming extracts two uniform, gristle-free Flat Iron steaks.
Scientific shear force comparison across carcass muscles (lower kg = more tender). Flat Iron ranks #2 overall, outperforming ribeye and strip steak.
Flat Iron Steak vs. Other Iconic Beef Cuts
Side-by-side comparison of Flat Iron Steak against Beef Tenderloin (Filet Mignon), Boneless Ribeye, Top Sirloin Butt, Denver Steak, and Skirt Steak across USDA fat content, protein density, shear force tenderness, and culinary applications.
| Cut Name | Subprimal Origin | WBSF Shear Tenderness | Fat / 100g | Protein / 100g | Calories | Price Tier | Best Culinary Use |
|---|---|---|---|---|---|---|---|
| ★Flat Iron Steak (Top Blade) | Infraspinatus (Chuck Clod) | 2.4 – 2.8 kg WBSFUltra Tender | 11.2g | 19.8g ★★★★☆ Med | 185 kcal | $$$ ($10–$14/lb) | High-heat skillet arrosé, direct grilling, fajitas, steakhouse cut |
| Beef Tenderloin (Filet Mignon) | Psoas major (Loin Primal) | 2.0 – 2.4 kg WBSFUltra Tender | 7.1g | 21.8g ★★★★★ High | 155 kcal | $$$$$ ($24–$35/lb) | Center-cut pan searing, Wellington, butter-basted medallions |
| Boneless Ribeye Steak | Longissimus dorsi / Spinalis (Rib) | 2.9 – 3.3 kg WBSFTender Marbled | 17.5g | 19.4g ★★★★☆ Med | 238 kcal | $$$$ ($16–$22/lb) | High-heat direct open grilling, cast-iron ribeye, reverse sear |
| Top Sirloin Butt (Heart) | Gluteus medius (Sirloin Primal) | 3.5 – 3.9 kg WBSFTender Lean | 5.3g | 22.3g ★★★★★ High | 142 kcal | $$$ ($8–$12/lb) | Baseball steaks, 225°F convection reverse roast, churrasco |
| Denver Steak (Under Blade) | Serratus ventralis (Chuck Primal) | 3.0 – 3.4 kg WBSFTender Marbled | 13.8g | 19.2g ★★★★☆ Med | 204 kcal | $$$ ($10–$14/lb) | High-heat quick grilling, Japanese yakiniku, skillet sear |
| Skirt Steak (Inside / Outside) | Diaphragm (Plate / Flank) | 4.4 – 4.9 kg WBSFModerate Marbled | 12.1g | 20.5g ★★★★★ High | 195 kcal | $$$$ ($14–$18/lb) | Ripping-hot open fire carne asada, citrus fajitas, tacos |
Tested Culinary Blueprints for Flat Iron Steak
Step-by-step culinary blueprints tested for optimal tenderness, crust development, and moisture retention across five classic steakhouse preparation protocols.
475°F Blistering Cast-Iron & Butter Arrosé
High-heat Maillard crust with garlic-thyme butter spoon-basting.
Because the Infraspinatus muscle is naturally ultra-tender (2.4 kg WBSF) with uniform marbling, it excels with rapid conductive searing. Basting continuously with foamy clarified butter and herbs creates a mahogany crust without overcooking the rosy medium-rare interior.
Ingredients & Ratios:
- Center-Cut Flat Iron Steaks (1" thick)Two 8-oz cuts
- Coarse Flake Kosher Salt (dry-brined)1.0 tbsp
- Freshly Ground Tellicherry Black Pepper1.0 tsp
- High-Smoke Beef Tallow or Avocado Oil1.0 tbsp
- Unsalted Butter, Crushed Garlic & Fresh Thyme2 tbsp, 3 cloves, 3 sprigs
Step-by-Step Execution:
- 1Dry brine steaks on an elevated wire rack in refrigerator for 4 to 12 hours; blot completely dry.
- 2Heat heavy cast-iron skillet over high flame until smoking (475°F); add beef tallow.
- 3Lay steaks gently into skillet away from you; sear undisturbed for 2.5 minutes until deeply caramelized.
- 4Flip steaks, drop in butter, crushed garlic cloves, and thyme sprigs. Tilt skillet and spoon foamy butter continuously over steaks for 2 minutes.
- 5Remove when core reads 130°F (for 135°F medium-rare target); rest on warm board 6 minutes before 90° bias carving.
- ✓Steakhouse-level caramelized crust in under 6 minutes total cook time.
- ✓Aromatic herb butter permeates every micro-crevice of the meat.
- ✓Exceptional tenderness rivaling filet mignon at half the price.
- ⚠Generates stovetop smoke; requires good kitchen ventilation.
- ⚠Fast cooking requires strict instant-read digital thermometer monitoring.
Global Names & Cultural Traditions
From American steakhouse cast-iron arrosé to British feather blade casseroles, French bistro macreuse steaks, and elite Japanese yakiniku Misuji, explore how world butcher traditions prepare the Infraspinatus.
Standardized in the USDA Institutional Meat Purchase Specifications as IMPS 114D. Fabricated by splitting the boneless Top Blade (IMPS 114D) horizontally along the internal connective tissue tendon.
In British butchery, called Feather Blade due to the feather-like vein pattern radiating from the center tendon. Also traditionally termed Butler’s Steak because butlers reserved this prized cut for themselves.
In classic French butchery, the whole muscle is the Paleron. When seamed along the grain, it produces succulent Bifteck de Macreuse for steak frites. In Germany and Austria, known as Schaufelstück.
In Japanese Wagyu and yakiniku culture, Misuji ("three lines") is an elite, highly prized cut recognized for intense dendritic marbling, delicate melt-in-the-mouth texture, and high umami.
Professional Butcher Breakdown: Seaming IMPS 114D
A whole Beef Top Blade weighs 4 to 6 pounds and contains a thick horizontal gristle band. Follow this two-step master fabrication sequence to separate the cut into two pristine Flat Iron steaks.
Horizontal Seam Cutting
Place the boneless Top Blade flat on your cutting board. Insert a sharp 8-inch flexible fillet or boning knife horizontally into the cut face just above the visible white center tendon. Keep the blade completely parallel to the board, slicing cleanly along the tendon sheet to peel the top half free.
Final Steak Portioning
Turn the remaining bottom half tendon-side up and shave off the white gristle sheet completely. Strip any exterior silver-skin from the dorsal face. Square off the edges to produce two uniform, rectangular Flat Iron steaks ready for searing or high-heat grilling.
Flat Iron Steak Frequently Asked Questions
Direct answers on flat iron steak anatomy, cooking doneness, tenderness ratings, and USDA macro-logging reference data.
A Flat Iron Steak (USDA IMPS 114D) is cut from the Top Blade of the Beef Chuck Shoulder Clod (IMPS 114). It is fabricated from the Infraspinatus muscle, located on the dorsal face of the scapula bone. It is famous for being the second-most tender muscle in the entire beef carcass.
Scientific Sources & USDA Analytical References
- USDA FoodData Central (2024). Beef, Chuck, Top Blade Steak, Separable Lean Only, Trimmed to 0" Fat, Choice, Raw. FDC ID: 170364, NDB: 13955.
- USDA FoodData Central (2024). Beef, Chuck, Top Blade Steak, Separable Lean Only, Trimmed to 0" Fat, Choice, Cooked, Grilled. FDC ID: 170365, NDB: 13956.
- Belew, J. B., Brooks, J. C., McKenna, D. R., & Savell, J. W. (2003). Warner-Bratzler shear evaluations of 40 bovine muscles. Meat Science, 64(4), 507-512.
- Calkins, C. R., & Sullivan, G. (2007). Adding Value to the Beef Chuck & Round: Tenderness and Muscle Characterization. University of Nebraska-Lincoln Extension Bulletin EC280.
- Johnson, D. D., & Calkins, C. R. (2000). Muscle Profiling: Improving the value of the beef chuck and round. Research Report, Cattlemen’s Beef Board & National Cattlemen’s Beef Association.
- Jeremiah, L. E., Dugan, M. E. R., Aalhus, J. L., & Gibson, L. L. (2003). Assessment of the chemical and cooking properties of retail beef cuts. Food Research International, 36(9), 903-919.
- North American Meat Institute (NAMI). (2020). The Meat Buyers Guide (8th ed.). Item No. 114D: Beef Chuck, Shoulder Clod, Top Blade Steak (Flat Iron).
- USDA Food Safety and Inspection Service. Title 9 CFR § 317.362 — Nutrient Content Claims for "Lean" and "Extra Lean".
Related tools
Beef Nutrition by Cut
Open the guide hub for shared raw-reference cut charts, comparison links, and system-level methodology.
Shoulder Steak Nutrition & Braise Calculator
Explore USDA certified lean Shoulder Steak nutrition (IMPS 114E / Ranch Steak), braise & reverse-sear calculator, and chuck clod butchery.
Top Sirloin Butt Nutrition & Roast Calculator
Explore USDA certified lean Top Sirloin Butt nutrition (IMPS 184), dual-mode roast & steak sear calculator, and picanha butchery.
Chuck Tender & Mock Tender Steak Nutrition
Explore boneless extra-lean chuck tender nutrition (IMPS 116B/1166), USDA extra-lean certification, and dynamic braise calculator.
Boneless Strip Steak Nutrition & Searing Calculator
Explore boneless lean strip steak nutrition (IMPS 1180), USDA lean certification, and dynamic searing & reverse-sear calculator.
Tenderloin Steak & Filet Mignon Nutrition
Explore boneless lean tenderloin steak nutrition (IMPS 190A), USDA lean certification, and dynamic searing calculator.
Top Round Roast Nutrition & Convection Calculator
Explore USDA certified extra lean Top Round Roast nutrition (IMPS 168/169), convection roasting calculator, and deli carving guide.
Beef Cuts Explained
Master guide to 8 primal beef cuts, butcher anatomy, tenderness ratings, and cooking methods.