
Shoulder Steak: Cut Guide & Nutrition Calculator
Also Known As: Beef Shoulder Steak; Arm Steak; Ranch Steak; English Steak; Shoulder Clod Steak; Clod Heart; IMPS 114E; IMPS 114C
A lean subprimal fabricated from the beef shoulder clod (Triceps brachii). Renowned for braised Swiss steak, reverse-seared ranch steaks, and Texas barbecue. USDA reference: 137 kcal, 21.6g protein, and 5.1g fat per 100g raw—for food-diary tracking and braising plans.
Where This Cut Comes From:
Chuck Primal | Shoulder Clod Subprimal
Positioned directly over the front arm bone (humerus) and shoulder blade (scapula) of the steer, the shoulder clod (IMPS 114) weighs 12 to 18 pounds. The main central muscle is the Triceps brachii, which butchers portion into boneless shoulder steaks or trim into tender ranch steaks.
Butcher's Pro Note
When buying shoulder steak for grilling, request Ranch Steaks (IMPS 114E trimmed clod heart). Ask the butcher to remove the heavy outer connective silver-skin. For Swiss steak or pot roasts, standard arm steaks with light marbling yield maximum gelatin richness!
Beef Shoulder Steak Braise & Reverse Sear Calculator
Select cut weight and cooking method. The algorithm calculates precise braising times, internal pull temperatures, carryover rest targets, and grain-slicing guidance.
💡 Pro-Tip: For braising, sear hard first to build fond; then maintain a gentle 300°F simmer to liquefy tough collagen into rich gelatin without boiling out juices.
USDA Nutrition Facts Panel
Informational use only: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (FDC 170803, raw Choice trimmed to 0" fat) unless noted.
Nutrition Facts
Serving Size: 100g (3.5 oz) Raw Choice Separable Lean
Values are per listed serving size (USDA FoodData Central). % DV uses the FDA 2,000 kcal reference diet for label-style logging only. USDA "Lean" tier follows Title 9 CFR § 317.362 labeling thresholds—not health recommendations. Source: USDA FoodData Central FDC ID 170803 (NDB 13037).
Informational Use Only: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (FDC 170803, raw Choice trimmed to 0" fat) unless noted.
USDA Macro Logging Reference: Shoulder Steak
Beef shoulder steak (Triceps brachii from the Chuck Clod subprimal) yields lean muscle protein with moderate connective tissue. Calibrated against USDA FoodData Central (FDC ID 170803 raw Choice trimmed to 0" fat, 171201 cooked braised), here are the three foundational logging pillars.
63% Caloric Protein Split
USDA data lists 21.6g protein and only 5.1g total fat per 100g raw. Whole-muscle protein generates ~63% of total caloric value.
9 CFR § 317.362 Standards
Choice shoulder steak trimmed to 0" fat easily satisfies official USDA packaging thresholds per 100g raw reference:
Zinc, B12 & Iron Yields
Raw baseline yields key essential micronutrients (FDA 2,000 kcal DV logging reference):
Why Low-Temperature Braising & Reverse Searing Protects Shoulder Clod
Heat migrates inward through conductive convection. Because the shoulder clod (Triceps brachii) operates under heavy locomotion, it features dense perimysial collagen sheaths. Understanding the denaturation thresholds of myosin, actin, and collagen is the key to unlocking fork-tender beef.
Moderate Lean rating (Belew et al., 2003). Responds exceptionally to either 90° cross-grain slicing or low-temperature collagen gelatinization.
Naturally lean clod heart muscle with substantial perimysial connective tissue networks that dissolve into rich gelatin under moist braising.
Actin contracts above 140°F, but connective collagen breaks down into succulent gelatin between 160°F and 203°F in moist heat.
Myosin denatures; cellular water fully retained (>90%). Initial protein unfolding baseline.
Juices locked inside; 85%+ moisture retained. Slice 90° across grain for steakhouse tenderness.
Actin tightens rapidly. Avoid holding shoulder steak in this dry heat zone to prevent chewiness.
Moist heat breaks collagen triple helix into silky gelatin, creating 100% fork-tender beef.
The Dual-Path Culinary Nature of Shoulder Clod
Unlike tenderloin or ribeye which rely strictly on intramuscular fat, shoulder steak is a dual-personality cut. Cooked quickly over dry heat, it must be kept at medium-rare (130°F–135°F) and carved paper-thin across the grain.
Alternatively, when braised at 300°F low simmer in liquid, the meat pushes past 185°F where tough collagen sheaths fully liquefy into rich gelatin, transforming the cut into fork-tender Swiss steak.
The 90-Degree Perpendicular Slicing Mandate
The Triceps brachii muscle possesses pronounced directional grain. Chewing parallel to these fibers forces teeth to grind through intact collagen-wrapped myofibril bundles.
Carving at a strict 90-degree perpendicular angle across the grain into 3mm to 4mm slices severs fiber bundles into short micro-segments, reducing mechanical chew resistance by up to 40%.
Shoulder Clod Muscular Architecture & Braise vs. Grill Thermodynamics
Dual-panel scientific diagram illustrating the subprimal anatomy of the Beef Chuck Shoulder Clod (Panel A) and the comparative cellular structural transformation between rapid dry grilling and moist-heat braising (Panel B).
The Shoulder Clod sits over the humerus and scapula. It divides into the Clod Heart (Triceps brachii / Shoulder Steak), Top Blade (Infraspinatus / Flat Iron), and Petite Tender (Teres major).
Direct high-heat cooking causes collagen to tighten into tough rubbery bands. Slow moist braising dissolves collagen into succulent, velvety gelatin.
Shoulder Steak vs. Other Iconic Chuck & Loin Beef Cuts
Side-by-side comparison of Beef Shoulder Steak against Flat Iron Steak, Chuck Tender, Top Sirloin Butt, and Flank Steak across USDA fat content, protein density, caloric yield, and optimal culinary techniques.
| Cut Name | Subprimal Origin | WBSF Shear Tenderness | Fat / 100g | Protein / 100g | Calories | Price Tier | Best Culinary Use |
|---|---|---|---|---|---|---|---|
| ★Beef Shoulder Steak (Arm Steak) | Triceps brachii (Chuck Clod) | 4.1 – 4.5 kg WBSFModerate Lean | 5.1g | 21.6g ★★★★★ High | 137 kcal | $$ ($6–$9/lb) | Dutch-oven braised Swiss steak, reverse sear ranch steak, tacos |
| Flat Iron Steak (Top Blade) | Infraspinatus (Chuck Clod) | 2.4 – 2.8 kg WBSFUltra Tender | 6.8g | 20.5g ★★★★☆ Med | 144 kcal | $$$ ($11–$15/lb) | High-heat direct open grilling, pan-searing, steakhouse cut |
| Chuck Tender (Mock Tender) | Supraspinatus (Chuck Primal) | 4.2 – 4.6 kg WBSFModerate Lean | 4.6g | 21.4g ★★★★★ High | 127 kcal | $$ ($6–$9/lb) | Slow pot roasting, French boeuf bourguignon, beef stew |
| Top Sirloin Butt (Heart) | Gluteus medius (Sirloin Primal) | 3.5 – 3.9 kg WBSFTender Lean | 5.3g | 22.3g ★★★★★ High | 142 kcal | $$$ ($8–$12/lb) | Center-cut baseball steaks, 225°F reverse roast, churrasco |
| Flank Steak (Bavette) | Rectus abdominis (Flank Primal) | 4.3 – 4.8 kg WBSFModerate Lean | 6.3g | 21.3g ★★★★★ High | 143 kcal | $$$$ ($12–$16/lb) | Quick high-heat flank steak grilling, London broil, fajitas |
Tested Culinary Blueprints for Shoulder Steak
Step-by-step culinary blueprints tested for optimal tenderness, collagen liquefaction, and carving performance across five classic preparation protocols.
225°F Low-Temp Reverse Sear (Ranch Steak)
Gentle convection heating followed by a ripping cast-iron crust flash.
Center-cut shoulder clod steaks (Ranch Steaks) contain dense muscle fibers. Roasting at 225°F brings core temperature to 125°F evenly, followed by a screaming 450°F sear in butter and herbs.
Ingredients & Ratios:
- Center-Cut Beef Shoulder Steaks (1.25" thick)Two 8-oz cuts
- Coarse Kosher Salt (dry-brined 8 hrs)1.0 tbsp
- Coarse Ground Tellicherry Black Pepper1.0 tsp
- Beef Tallow or High-Smoke Oil1.0 tbsp
- Clarified Butter & Fresh Thyme1.5 tbsp
Step-by-Step Execution:
- 1Dry brine steaks on an elevated wire rack in refrigerator for 8 to 12 hours.
- 2Preheat oven to 225°F (107°C) convection. Insert digital probe into the center of the steak.
- 3Roast until internal digital core reads 125°F for medium-rare.
- 4Sear in smoking cast iron with tallow for 60 seconds per side, basting with butter and thyme.
- 5Rest 8 minutes before slicing strictly perpendicular (90°) across the grain.
- ✓Edge-to-edge pink center with minimal moisture drip.
- ✓Crisp caramelized Maillard crust without gray ring.
- ✓Affordable steakhouse quality from budget chuck clod.
- ⚠Requires digital probe and two-stage cooking.
- ⚠Must slice thin across grain to avoid chewiness.
Global Names & Cultural Traditions
From classic American slow-braised Swiss steak to British braising clod casseroles, French bistro macreuse steaks, and Japanese yakiniku Uwa Misuji, explore how world butcher traditions prepare beef shoulder.
Standardized in USDA purchase specifications: IMPS 114 is the whole shoulder clod; 114E is the boneless shoulder arm steak; trimmed center portions are marketed as Ranch Steaks.
In British, Australian, and New Zealand butchery, shoulder clod is classified under Clod & Chuck. Frequently labeled as Braising Steak or English Cut for slow casserole cooking.
In French butchery, the clod heart is fabricated as Macreuse à Bifteck for quick searing, while adjacent top blade is Paleron for classic pot-au-feu. In Germany, known as Dickes Bugstück.
In Japanese yakiniku, specific clod muscles are sliced paper-thin as Uwa Misuji. In Latin American carnicerías, thin-pounded clod steaks are called Palomilla or Bistec de Paletilla.
Professional Butcher Breakdown: IMPS 114 to 114E (Ranch Steak)
A wholesale Beef Shoulder Clod (IMPS 114) weighs between 12 and 22 pounds. Follow this two-step master fabrication breakdown to isolate the Clod Heart (Triceps brachii) and carve tender Ranch Steaks (IMPS 114E).
Seaming Along Natural Connective Tissue
Place the whole shoulder clod fat-side down. Locate the natural white seam separating the Flat Iron (Infraspinatus) and Petite Tender (Teres major) from the primary Triceps brachii. Insert a sharp 6-inch flexible boning knife into the seam and roll the Clod Heart free along the natural membrane without puncturing muscle meat.
Removing Heavy Epimysium & Cutting Medallions
Slide the boning knife under the heavy bluish-white silver-skin (epimysium) sheet covering the dorsal face, keeping the blade angled upward to strip silver-skin cleanly. For Swiss steak or pot roasts, cut into 2 to 3-lb rectangular blocks. For Ranch Steaks, slice perpendicular across the muscle grain into uniform 1.0 to 1.25-inch thick steakhouse medallions.
Shoulder Steak Frequently Asked Questions
Authoritative answers to the most frequent queries regarding shoulder steak anatomy, braising vs searing doneness, nutrition values, and tenderness optimization.
Beef Shoulder Steak (USDA IMPS 114E), also called Arm Steak or Ranch Steak, is fabricated from the Shoulder Clod subprimal in the Chuck primal. It is composed primarily of the Triceps brachii muscle located along the rear edge of the humerus and scapula bones.
Scientific Sources & USDA Analytical References
- USDA FoodData Central (2024). Beef, Chuck, Shoulder Clod, Shoulder Steak, Separable Lean Only, Trimmed to 0" Fat, Choice, Raw. FDC ID: 170803, NDB: 13037.
- USDA FoodData Central (2024). Beef, Chuck, Shoulder Clod, Shoulder Steak, Separable Lean Only, Trimmed to 0" Fat, Choice, Cooked, Braised. FDC ID: 171201, NDB: 13049.
- Belew, J. B., Brooks, J. C., McKenna, D. R., & Savell, J. W. (2003). Warner-Bratzler shear evaluations of 40 bovine muscles. Meat Science, 64(4), 507-512.
- Calkins, C. R., & Sullivan, G. (2007). Adding Value to the Beef Chuck & Round: Tenderness and Muscle Characterization. University of Nebraska-Lincoln Extension Bulletin EC280.
- USDA Title 9 Code of Federal Regulations § 317.362: Labeling of meat and poultry products; nutrient content claims for "lean" and "extra lean".
- Jeremiah, L. E., Dugan, M. E. R., Aalhus, J. L., & Gibson, L. L. (2003). Assessment of the chemical and cooking properties of retail beef cuts. Food Research International, 36(9), 903-919.
- North American Meat Institute (NAMI). (2020). The Meat Buyers Guide (8th ed.). Item No. 114E: Beef Chuck, Shoulder Clod, Shoulder Steak.
Related tools
Beef Nutrition by Cut
Open the guide hub for shared raw-reference cut charts, comparison links, and system-level methodology.
Flat Iron Steak Nutrition & Sear Calculator
Explore Flat Iron steak nutrition (IMPS 114D / Infraspinatus), 2nd most tender beef cut ranking, skillet arrosé calculator, and butcher seaming guide.
Top Sirloin Butt Nutrition & Roast Calculator
Explore USDA certified lean Top Sirloin Butt nutrition (IMPS 184), dual-mode roast & steak sear calculator, and picanha butchery.
Chuck Tender & Mock Tender Steak Nutrition
Explore boneless extra-lean chuck tender nutrition (IMPS 116B/1166), USDA extra-lean certification, and dynamic braise calculator.
Top Round Roast Nutrition & Convection Calculator
Explore USDA certified extra lean Top Round Roast nutrition (IMPS 168/169), convection roasting calculator, and deli carving guide.
Top Sirloin Filet Nutrition
Explore USDA certified lean Top Sirloin Filet nutrition (IMPS 184B Baseball Cut), reverse-sear calculator, and 5 steakhouse blueprints.
Bottom Round Steak Nutrition
Explore USDA certified lean Bottom Round Steak nutrition (IMPS 170), Swiss steak calculator, and 5 tested blueprints.
Tenderloin Steak & Filet Mignon Nutrition
Explore boneless lean tenderloin steak nutrition (IMPS 190A), USDA lean certification, and dynamic searing calculator.
Beef Cuts Explained
Master guide to 8 primal beef cuts, butcher anatomy, tenderness ratings, and cooking methods.