
Cross Rib Roast: Cut Guide & Roast Calculator
Carved from the beef shoulder clod (Triceps brachii), Cross Rib Roast is a 100% boneless, USDA-certified lean cut providing 21.6g protein and only 5.1g fat per 100g raw. Calculate low-temp convection roasting times for pink carvery slices, or Dutch oven braising parameters for classic Sunday pot roast.
Chuck Primal | Shoulder Clod Subprimal
The shoulder clod (IMPS 114) rests directly over the front arm bone (humerus) and dorsal scapula. The central muscular block—the Triceps brachii—is fabricated into the boneless Cross Rib Roast (IMPS 114A), also known as the Boston Cut or English Roast.
Butcher Specification: 100% Edible Yield
Unlike bone-in roasts or fatty cuts with heavy waste margins, Cross Rib Roast (IMPS 114A) delivers zero skeletal bone waste and tight lean density.
- 0% Bone Tare: 100% of the purchased raw weight is net edible meat.
- USDA Certified Lean: Only 5.1g fat per 100g raw and 6.8g cooked, fitting strict macronutrient meal prep targets.
- Butcher Twine Trussing: Tying the clod into a cylinder ensures uniform convective heat penetration, preventing overcooked edges.
Dynamic Low-Temp Roast & Pot Braise Calculator
at 225°F oven
Pull at 130°F (rest 20m)
100% boneless edible yield
1007g true net intake
Tie the shoulder clod tightly with butcher twine at 1-inch intervals to create an even cylindrical shape. Rest 20 minutes to allow carryover heat to reach 135°F before searing in foaming butter or slicing.
Carving Orientation: Carve deli-thin (1/8 inch) across the grain to maximize tenderness.
Nutrition Profile & Daily Value Gauges
FDC ID #170803 (Raw Choice Separable Lean trimmed to 0" fat). Select a standard portion to view FDA daily value gauges and macro breakdowns.
Nutrition Facts
* The % Daily Value (DV) tells you how much a nutrient in a serving of food contributes to a daily diet. 2,000 calories a day is used for general nutrition advice.
Informational Notice: This tool is for informational nutrition logging, meal planning, and culinary reference only. It is not medical guidance. Nutrient values are USDA FoodData Central reference data (FDC 170803, raw Choice separable lean trimmed to 0" fat; FDC 171201, cooked braised/roasted separable lean trimmed to 0" fat; FDC 170368, cooked separable lean and fat) unless noted.
Footnote: Values are per listed serving size (USDA FoodData Central). % DV uses the FDA 2,000 kcal reference diet for label-style logging only. USDA "Lean" tier follows Title 9 CFR § 317.362 labeling thresholds—not health recommendations. Cross Rib Roast contains 0% bone tare (100% edible yield).
3 USDA Macro Logging Pillars for Cross Rib Roast
Accurate nutritional logging for Cross Rib Roast relies on its official USDA Certified Lean designation, 100% boneless edible yield, and high concentrations of bioavailable zinc and vitamin B12.
USDA Certified Lean Qualification
Under Title 9 CFR § 317.362, Cross Rib Roast qualifies as official USDA Certified Lean Beef. A 100g raw separable lean serving contains only 5.1g total fat, 1.8g saturated fat, and 68mg cholesterol—far below the federal ceilings of 10g total fat and 4.5g saturated fat.
0% Bone Tare (100% Edible Net Intake)
Unlike bone-in chuck short ribs or prime rib containing 30% to 40% skeletal bone waste, Cross Rib Roast (IMPS 114A) is fabricated 100% boneless. Every ounce purchased translates directly to edible protein, providing high yield for meal prep and nutrition diaries.
Cellular Zinc & Vitamin B12 Density
As a major locomotive muscle (*Triceps brachii*), Cross Rib Roast maintains elevated vascularization and myoglobin concentrations. A 100g cooked serving provides 8.4mg of bioavailable zinc (76% DV) and 3.6µg of vitamin B12 (150% DV).
Thermodynamics & Muscle Architecture of the Shoulder Clod
The *Triceps brachii* possesses dense, uniform muscle fiber bundles surrounded by a thin connective tissue sheath. Understanding its thermal behavior allows chefs to choose between gentle low-temp roasting and moist-heat pot braising.
Low-Temp 225°F Convection Roasting (The Reverse Roast)
When lean beef is exposed to high ambient heat (375°F–425°F), actin and myosin proteins contract rapidly, expelling intracellular water and leaving lean meat dry and gray.
- 225°F Convection: Thermal energy gently migrates inward without seizing outer muscle layers, preserving maximum moisture.
- 130°F–135°F Core: Pulling the roast at 130°F allows a 5°F carryover rise to 135°F medium-rare, maintaining tenderness across 90% of the cross-section.
300°F Dutch Oven Pot Braising (The Gelatin Transformation)
Alternatively, when cooked in moist heat above 180°F for 3+ hours, the perimysial collagen sheath undergoes hydrolytic cleavage, melting into rich, water-soluble gelatin at 203°F.
Dual-Panel Scientific Infographics: Anatomy & Thermal Curves
Panel A illustrates the anatomical architecture of the shoulder clod muscles over the humerus and scapula. Panel B charts thermal moisture retention and gelatin conversion across doneness levels.
Cross Rib Roast Muscular Orientation
Positioned on the rear border of the scapula and humerus. Cross Rib Roast / Clod Heart is the thick central Triceps brachii muscle.
Moisture Retention vs. Gelatin Conversion Curve
Illustrates the two distinct culinary finish zones: the 135°F pink carvery zone and the 203°F gelatin pot braise zone.
Cross Rib Roast vs. Alternative Primal Roasts
Compare Cross Rib Roast directly with Chuck Eye Roast, Eye of Round, Sirloin Tip Roast, and Brisket Flat across fat profile, bone tare, and cooked macros.
| Cut & IMPS Code | Primal Origin | Bone Tare | USDA Lean Tier | Calories | Protein | Zinc (DV%) |
|---|---|---|---|---|---|---|
| ★Cross Rib Roast (IMPS 114A) | Chuck | 0% (Boneless) | USDA Certified Lean (5.1g fat raw) | 187 kcal | 29.8g | 8.4mg (76%) |
| Chuck Eye Roast (IMPS 116A) | Chuck | 0% (Boneless) | Moderately Marbled | 245 kcal | 31.4g | 8.6mg (78%) |
| Eye of Round Roast (IMPS 171C) | Round | 0% (Boneless) | USDA Extra Lean (3.5g fat raw) | 166 kcal | 30.2g | 5.2mg (47%) |
| Sirloin Tip Roast (IMPS 167A) | Round / Sirloin | 0% (Boneless) | USDA Extra Lean (4.1g fat raw) | 172 kcal | 30.8g | 5.6mg (51%) |
| Beef Brisket Flat (IMPS 120A) | Brisket | 0% (Boneless) | Lean to Moderate | 228 kcal | 33.1g | 6.8mg (62%) |
5 Tested Culinary Blueprints for Cross Rib Roast
Tested culinary procedures with exact time, temperature, and trussing techniques for tender roast beef, Sunday pot roast, and low-temp sous vide.
225°F Precision Herb-Crusted Carvery Roast (Reverse Sear)
The modern restaurant method for edge-to-edge pink medium-rare doneness
Step-by-Step Culinary Procedure
- Truss the Cross Rib Roast: Tie butcher twine firmly around the roast at 1-inch intervals to form a uniform, compact cylinder. This prevents thin tapered ends from overcooking.
- Dry Brine: Season generously on all surfaces with coarse kosher salt (1/2 tsp per pound). Place uncovered on a wire rack over a rimmed baking sheet in the refrigerator for 8 to 24 hours. The surface will dry into a glossy sheen.
- Herb Crust: Mix 2 tablespoons cracked black pepper, 1 tablespoon granulated garlic, 1 tablespoon chopped fresh rosemary, and 1 tablespoon Dijon mustard. Rub evenly over the trussed roast.
- Preheat oven to 225°F (107°C) convection (or conventional). Insert a leave-in digital meat thermometer probe into the geometric center of the roast.
- Roast slowly on the wire rack until the core thermometer registers 130°F (54°C) for medium-rare, or 123°F (50°C) for rare. This typically takes 30 to 35 minutes per pound.
- Rest & Sear: Remove roast from oven, tent loosely with foil, and rest 20 minutes. Internal temperature will rise by 5°F via carryover heat. Heat 2 tablespoons of beef tallow or ghee in a heavy cast iron skillet over high heat, searing the roast for 60 seconds per side until deeply crusted.
- Carve across the grain into wafer-thin slices (1/8-inch) with a sharp slicing knife.
Because the Triceps brachii has dense linear muscle fibers, slicing deli-thin across the grain is the single most critical step. Thick slices will taste chewy, whereas paper-thin slices melt in the mouth.
Global Butcher Nomenclature for Cross Rib Roast
How beef Cross Rib Roast (IMPS 114A) is identified, fabricated, and prepared across international butcheries.
Cross Rib Roast / Shoulder Clod Roast
USDA IMPS / NAMP Item 114A (Roast) or 114 (Shoulder Clod). Also: English Roast, Boston Cut, Bread and Butter Roast.
Tied into a cylindrical roast for 225°F convection roasting, pot braising, or sliced into ranch steaks.
Cross Rib Pot Roast / Rôti de palette découenné
Canadian Meat Inspection System: Cut from the shoulder clod (palette) trimmed boneless.
The premier cut for traditional Canadian Sunday pot roast with root vegetables.
Clod Roast / English Chuck Braising Joint
Cut from the forequarter Clod & Chuck block, boned and rolled with butcher twine.
Traditional British Sunday roast beef served with Yorkshire puddings, or slow-casserole braise.
Paleron à braiser / Macreuse à pot-au-feu
Macreuse à bifteck / Macreuse à braiser cut from the épaule (shoulder).
Classic cut for traditional French Pot-au-Feu and Bœuf Bourguignon.
Tapa de Aguja / Cuadril de Paleta
Boneless cut from the paleta (shoulder), trimmed of heavy connective tissue.
Slow-roasted whole on the parrilla or braised in estofado criollo with tomato and wine.
Katasankaku (肩三角) / Clod Roast
Wagyu shoulder clod heart (Triceps brachii), sliced into yakiniku or roast beef.
Celebrated for balanced marbling and savory beef umami in high-end Yakiniku and Sukiyaki.
Butcher Trussing & 90° Cross-Grain Carvery Slicing
Because the shoulder clod tapers naturally, butcher twine trussing and perpendicular slicing across muscle grain are essential to achieve melt-in-the-mouth tenderness.
Tying butcher twine around the shoulder clod every 1 inch forces the naturally tapered muscle into a uniform cylinder. This ensures the center and edges cook at the exact same rate.
Muscle fibers in the Triceps brachii run horizontally. Slicing perpendicular to the fibers severs them into microscopic lengths, producing tender roast beef rather than stringy chew.
Frequently Asked Questions: Cross Rib Roast
Authoritative answers on roasting, pot braising, lean certification, twine trussing, and meal prep storage.
Academic Citations & USDA Reference Datasets
Nutritional values, lean labeling claims, and biophysical metrics in this guide are calibrated to official food composition databases and peer-reviewed meat science publications.
- U.S. Department of Agriculture, Agricultural Research Service (2024): “Beef, chuck, shoulder clod, shoulder steak, separable lean only, trimmed to 0" fat, choice, raw (FDC ID 170803, NDB 13037)” FoodData Central National Nutrient Database. [Reference Link]
- U.S. Department of Agriculture, Agricultural Research Service (2024): “Beef, chuck, shoulder clod, shoulder steak, separable lean only, trimmed to 0" fat, choice, cooked, braised/roasted (FDC ID 171201, NDB 13049)” FoodData Central National Nutrient Database. [Reference Link]
- North American Meat Institute (NAMI) (2023): “The Meat Buyer's Guide (8th Edition): IMPS Item 114A (Beef Chuck, Shoulder Clod Roast / Cross Rib Roast) & Item 114 (Shoulder Clod)” Institutional Meat Purchase Specifications (IMPS). [Reference Link]
- Calkins, C.R. & Johnson, D.D. (2000): “Muscle profiling: Characterization of fresh muscle traits of the beef chuck and round (Triceps brachii profiling)” Research Report to the Cattlemen’s Beef Board, National Cattlemen’s Beef Association. [Reference Link]
- Tornberg, E. (2005): “Effects of heat on meat proteins - Implications on structure and quality of meat products” Meat Science, 70(3), 493-508. [Reference Link]
- U.S. Food and Drug Administration / USDA FSIS (2024): “Title 9 CFR § 317.362 - Nutrient content claims for fat, fatty acids, and cholesterol contents of meat products (Lean and Extra Lean criteria)” Code of Federal Regulations. [Reference Link]
- Belew, J.B., Brooks, J.C., McKenna, D.R., & Savell, J.W. (2003): “Warner-Bratzler shear evaluations of 40 bovine muscles” Meat Science, 64(4), 507-512. [Reference Link]
Related tools
Beef Nutrition by Cut
Open the guide hub for shared raw-reference cut charts, comparison links, and system-level methodology.
Shoulder Steak Nutrition & Braise Calculator
Explore USDA certified lean Shoulder Steak nutrition (IMPS 114E / Ranch Steak), braise & reverse-sear calculator, and chuck clod butchery.
Flat Iron Steak Nutrition & Sear Calculator
Explore Flat Iron steak nutrition (IMPS 114D / Infraspinatus), 2nd most tender beef cut ranking, skillet arrosé calculator, and butcher seaming guide.
Chuck Short Ribs Nutrition & Braise Calculator
Explore Chuck Short Ribs nutrition (IMPS 130 / Serratus ventralis), collagen-to-gelatin braising kinetics, bone tare calculator, and French & Korean blueprints.
Chuck Tender & Mock Tender Steak Nutrition
Explore boneless extra-lean chuck tender nutrition (IMPS 116B/1166), USDA extra-lean certification, and dynamic braise calculator.
Sirloin Tip Roast Nutrition & Convection Guide
Explore boneless extra-lean sirloin tip roast nutrition (IMPS 167/167A), USDA extra-lean certification, and dynamic 250°F convection roasting calculator.
Top Round Roast Nutrition & Convection Calculator
Explore USDA certified extra lean Top Round Roast nutrition (IMPS 168/169), convection roasting calculator, and deli carving guide.
Top Sirloin Butt Nutrition & Roast Calculator
Explore USDA certified lean Top Sirloin Butt nutrition (IMPS 184), dual-mode roast & steak sear calculator, and picanha butchery.
Best Beef Cuts for Oven Roasting
Compare 12 beef roast cuts by tenderness, marbling, collagen conversion, budget, and cook time with interactive roasting calculator and USDA nutrition.
Beef Cuts Explained
Master guide to 8 primal beef cuts, butcher anatomy, tenderness ratings, and cooking methods.